new cell configurations help

[countryboy18]

do anyone see any problems with this cell configurations it will be in a car. i will use what ever chemical you tell me will work best. the blue bolts are plastic and the white nuts are SS. blue washers are 1/8 thick. i plan on using the holes that come in the wall plats and just making the the holes 1/4 size. it will be under vacuum that is atached to the intake manifold were the master break booster gets it vacuum. it is realy close to scale. 4" pvc pipe 12 inch long and a screw on cap, hope it seals good. thanks for any help!!! i can make the pipe longer if it will help.

[you2wire]

remove the nuts beside the nylon washers just use the washer alone and thats it.

[dennis13030]

Instead of two stacked sets in parallel, why not use one set that is 2 times as long?

[countryboy18]

i am using wall plates should i flaten them with a hammer or keep them normal. and then does it matter of i make the clam shape with the cells any benfit if i do that or how shoud the plates face? -()NN()NN()NN()+. ()()()() are the plates with out there power. hope u under stand that. i didnt show the curved plates in the drawing to hard to work that way. thanks!!!

[dennis13030]

Like this................... oppps. Wall plates, ok I undersatnd.

[countryboy18]

does it matter the way the plates face. there are no nuts in the middle of the plates that is spacers (blue) that seperate the plates

[Boltazar]

Dennis 13030 the generator in your last reply a 4 cell series setup? If so volts across each cell would be about 4 ?

Pete

[dennis13030]

Lets see.

With a nut between two plates used as neutrals, the configuration is equivalent to -NNN+. Which makes 5 plates and 4 cells. If the anode to cathode voltage is 12V, then each cell should have about 3V.

[rzone]

Lets see.

With a nut between two plates used as neutrals, the configuration is equivalent to -NNN+. Which makes 5 plates and 4 cells. If the anode to cathode voltage is 12V, then each cell should have about 3V.

And above this the space between 2 adjacent neutral plates is wasted(won't produce anything) because they have the same electric potential.
I want to upload a pdf that confirm and complete all my trials and for me seems to have the best explanation so far. I don't know if is here already but i'll do it anyway... if you have any comments on it pls post it so we can dissect on it.




LE:
I can't upload more than 19k
need 300...

[countryboy18]

so rzone how would u sujest the plates to be aranged it is easy for me to make the cell up on the computer and post a pic. just tell me the configeration and i can make it into a picture. make one with the positive and nergtive and nurtal plates "-n+n-n" "-nnnn+nnnn-" something like that and then one with witch way the plates will be pointed "()()()()" "((((()))))" thanks!!!