Originally Posted by
kiki
hi there,
i was thinking building the following unit on my jeep grand cherokee 5.9 v8
a cell with 31 plates. pltes size 65mm x 200mm. , 1mm thick
setup: +nnnnn-nnnn+nnnn-nnnn+nnnn-
plate spacing 1 mm.
wrap this cell in rescuetape
container is going to be 110 mm. tube, 25 cm long (2,5 litres)
a bubbler container on top (1 ltr). filled with 2/3 electrolyte. the output of the cell with a hose to the bottom of the bubbler. an other hose from the bottom of the bubbler to the bottom of the cell. (creates a flow which cools the system)
hose from this bubblertank to an extra bubbler (filled 1/3 water)
using Nao2
i tested the bubbler system with return hose, this works great! also 1 mm spacing ad the type of electrolyte works pretty good. wondering if i am on the right track, and hoping to get some comments/advise.
thanks,arjen