How do you position your reservoir, dry cell, and bubbler?

[Nadasive]

Here is my dry cell setup
http://i48.tinypic.com/63xl.jpg
http://i46.tinypic.com/34rvtp4.jpg


I'm pretty sure its correct, its working fine I went from 14mpg to about 19-20.
The wet cell smacksbooster i built works A LOT BETTER.
I just need to find a way to remove the water before it goes into intake. :confused:


sooooooooooo considering the newbie that I am, how does this setup look to you guys? I'd like to get a few 2nd opinions.

[Havens78]

Do a search for bubbler design and you'll find a way to build one that won't let water travel to your intake.

Your reactor needs to be the lowest point in the system if you're not going to run a secondary reservoir. I would recommend doing a search for that as well, they really keep things cooler in my experience.

Do a search for the other bubbler designs out there and a secondary reservoir, other than that from the pictures you posted I can't see much else. How long is your current bubbler?

[Nadasive]

Do a search for bubbler design and you'll find a way to build one that won't let water travel to your intake.

Your reactor needs to be the lowest point in the system if you're not going to run a secondary reservoir. I would recommend doing a search for that as well, they really keep things cooler in my experience.

Do a search for the other bubbler designs out there and a secondary reservoir, other than that from the pictures you posted I can't see much else. How long is your current bubbler?

My bubbler is about the same length as the water tank.
And are you suggesting I try and mount the dry cell somewhere lower?

[iveyjh]

I don't think I have ever seen someone install a drycell sideways before. That is sideways isn't it? It's hard to tell from that photo. I guess as long as it works.

[Akito]

id make some kind of breather or regulator controlled by vaccum. Try a fuel rail regulator perhaps.

[Nadasive]

I don't think I have ever seen someone install a drycell sideways before. That is sideways isn't it? It's hard to tell from that photo. I guess as long as it works.


Yes it is sideways,
I plan on re-mounting it underneath that same piece metal its connected to.
I have a feeling doing that might affect the production. I just need more hose:(

[Nadasive]

id make some kind of breather or regulator controlled by vaccum. Try a fuel rail regulator perhaps.

I was thinking about one of these;
http://www.amazon.com/INLINE-FILTER-Paint-Spray-Gun-Tool-Water/dp/B001NJKAK2/ref=pd_sxp_f_i/180-8703266-9988137

a lot cheaper then a fuel rail regulator lol.

[Akito]

lol indeed sorry thinking like a tech is always hard to turn off.

[Nadasive]

lol indeed sorry thinking like a tech is always hard to turn off.

LOL
where do you work?