madman
12-02-2011, 04:16 PM
Do you all think this media blaster will work for doing plates? What is the best grit and type of media to use? I have never done this before and was also wondering if there was a special technique to use that works best?
Mark
Portable Abrasive Blaster Kit
Item # 37025 Manufacturer: Central Pneumatic
Utilizes 1 HP compressor or larger for mobile blasting
Description
The portable abrasive blaster kit comes with a blast gun, 15 ft. material hose and hopper than can hold up to 50 lbs. of abrasive media, including steel grit, glass beads, pecan shells and more. Just hook it up to a 1 HP or larger compressor and easily remove paint, rust, graffiti, corrosion and scale. A 3mm hex key is included.
■Air inlet 1/4" NPT
■Average air consumption: 2 CFM @ 50 PSI
■Maximum air pressure: 120 PSI
■Hopper capacity: 50 lbs.
■Long 15- ft. supply hose
■Includes a 3mm hex key
Compressor requirement: 1 HP or larger
Minimum air requirement: 3.5 CFM @ 50 PSI
Hopper capacity: 50 lbs.
Hose length: 15 ft.
.
Customer Rating:
Read 8 Reviews
Write a Review
.
Description
The portable abrasive blaster kit comes with a blast gun, 15 ft. material hose and hopper than can hold up to 50 lbs. of abrasive media, including steel grit, glass beads, pecan shells and more. Just hook it up to a 1 HP or larger compressor and easily remove paint, rust, graffiti, corrosion and scale. A 3mm hex key is included.
■Air inlet 1/4" NPT
■Average air consumption: 2 CFM @ 50 PSI
■Maximum air pressure: 120 PSI
■Hopper capacity: 50 lbs.
■Long 15- ft. supply hose
■Includes a 3mm hex key
Compressor requirement: 1 HP or larger
Minimum air requirement: 3.5 CFM @ 50 PSI
Hopper capacity: 50 lbs.
Hose length: 15 ft.
Shipping Weight: 6.10 lbs.
Mark
Portable Abrasive Blaster Kit
Item # 37025 Manufacturer: Central Pneumatic
Utilizes 1 HP compressor or larger for mobile blasting
Description
The portable abrasive blaster kit comes with a blast gun, 15 ft. material hose and hopper than can hold up to 50 lbs. of abrasive media, including steel grit, glass beads, pecan shells and more. Just hook it up to a 1 HP or larger compressor and easily remove paint, rust, graffiti, corrosion and scale. A 3mm hex key is included.
■Air inlet 1/4" NPT
■Average air consumption: 2 CFM @ 50 PSI
■Maximum air pressure: 120 PSI
■Hopper capacity: 50 lbs.
■Long 15- ft. supply hose
■Includes a 3mm hex key
Compressor requirement: 1 HP or larger
Minimum air requirement: 3.5 CFM @ 50 PSI
Hopper capacity: 50 lbs.
Hose length: 15 ft.
.
Customer Rating:
Read 8 Reviews
Write a Review
.
Description
The portable abrasive blaster kit comes with a blast gun, 15 ft. material hose and hopper than can hold up to 50 lbs. of abrasive media, including steel grit, glass beads, pecan shells and more. Just hook it up to a 1 HP or larger compressor and easily remove paint, rust, graffiti, corrosion and scale. A 3mm hex key is included.
■Air inlet 1/4" NPT
■Average air consumption: 2 CFM @ 50 PSI
■Maximum air pressure: 120 PSI
■Hopper capacity: 50 lbs.
■Long 15- ft. supply hose
■Includes a 3mm hex key
Compressor requirement: 1 HP or larger
Minimum air requirement: 3.5 CFM @ 50 PSI
Hopper capacity: 50 lbs.
Hose length: 15 ft.
Shipping Weight: 6.10 lbs.