PDA

View Full Version : What is my MMW?... 12.65 volts 15.5 amps 1 liter per 60 sec.


stockstinks
07-31-2008, 07:54 PM
What is my MMW??... 12.65 volts 15.5 amps 1 liter per 60 sec.

Can you help me??? This is a brand new sealed plate system that I built.
Painless
07-31-2008, 08:39 PM
According to the calculator here:

http://www.watervan.co.uk/tools.php

... you are making 5.10 MMW.
stockstinks
07-31-2008, 08:57 PM
Thank you!
dennis13030
07-31-2008, 09:19 PM
What is my MMW??... 12.65 volts 15.5 amps 1 liter per 60 sec.

Can you help me??? This is a brand new sealed plate system that I built.

MMW is new to me. It is an expression of the efficiency of an electrolyzer and it stands for Mililitres per Minute per Watt. I normally use Litres per Minute per Watt(LMW). However, it does make sense to me to use mmw instead.

http://www.watervan.co.uk/tools.php
The mmw calculator is nice. If you wanted to do this calculation manually, use the following.

Watts = Voltage x Amperage, this is the power used.

Minutes is the time it took to produce the sample of HHO expressed in minutes.

Mililitres is the amount of HHO gas produced in the sample expressed in Mililitres.

MMW = Mililitres divided by Minutes divided by Watts
BoyntonStu
07-31-2008, 09:33 PM
According to the calculator here:

http://www.watervan.co.uk/tools.php

... you are making 5.10 MMW.


5.1 MMW is very efficient. Almost extraordinary.


Most folks never see 4.

What is your setup?

BoyntonStu
stockstinks
07-31-2008, 10:06 PM
I have a video of it on Youtube.

Here is a link. http://http://www.youtube.com/watch?v=l5g0hNP6OaQ

If that doesn't work, you can find me by my name "stockstinks"
Check it out and let me know what you think of it.

Todd.
stockstinks
07-31-2008, 10:08 PM
I don't think the link worked. Can someone fix it?
Todd.
BoyntonStu
07-31-2008, 10:28 PM
I have a video of it on Youtube.

Here is a link. http://http://www.youtube.com/watch?v=l5g0hNP6OaQ

If that doesn't work, you can find me by my name "stockstinks"
Check it out and let me know what you think of it.

Todd.

Todd,


Congratulations!

Your work is superb.

I believe that you have a state of the art generator.

Have you tried pushing it to 2,000/min?

Please post in your plate configuration, electrolyte, and the plate dimensions.


I'm going a different route with a SS pot.


My hope is that it will perform as well as yours but it is for me, easier to build.


BoyntonStu
Omega
07-31-2008, 11:36 PM
Here's a link that works: http://www.youtube.com/watch?v=l5g0hNP6OaQ
stockstinks
08-01-2008, 07:45 PM
Thanks everyone!

I'll get a chance to play with this some more after the weekend.

Stockstinks.