production pictures 6 lpm

[Popsie]

http://i603.photobucket.com/albums/tt116/Popsie7625/production002.jpg http://i603.photobucket.com/albums/tt116/Popsie7625/Dylansgenerator001.jpg http://i603.photobucket.com/albums/tt116/Popsie7625/production004.jpg

[Helz_McFugly]

wild, thats for the pics. I always like to see peoples systems i action. except for the mason jar people. could care less.

[Popsie]

Plugs into the wall (120vac ) goes through a bridge rectifier to get 109vdc.
64 plates spaced 3/8. 5 x 8.5 x .0155 316L
1.70 volts per cell.
3 cups KOH 3.75 gallons
At 5 amps 6 lpm
545 watts
28 x 12 x 5.5 overall

[Popsie]

Going to put a 3000 watt inverter in a truck and connect to vacuum port this next week and report what happens. My bubbler will have a vent so it does try to collapse the generator and pull up the koh. The generator is to be steel reinforced so a pressure switch will cut it off and on. It's made with 1/4 doubled Plexigass case, 3/8 plexiglass plate spacers, glued with Weld-on #16 solvent cement sealed with GE 100% silicone for plastic sheets ( make sure it says for plastic sheets or it won't work.) Terminals are 1/4 inch SS bolts with phenolic insulators

[22350]

Plugs into the wall (120vac ) goes through a bridge rectifier to get 109vdc.
64 plates spaced 3/8. 5 x 8.5 x .0155 316L
1.70 volts per cell.
3 cups KOH 3.75 gallons
At 5 amps 6 lpm
545 watts
28 x 12 x 5.5 overall

wow you just did a MMW of 11.

hmmmmmm.........