The Amoeba Cell - A New Position!

[BoyntonStu]

I tried the Amoeba Cell rotated 45* with the output at the top of the "diamond".

Note* All the top holes are in line, not staggered.

When assembling the cell, I used a rod to align the plates and their gaskets.

A very easy build method for the 13 inner plates plus 1 end plate.

The other end plate is at the 45* bottom position.

Here's the results, not too shabby.

Volts Amps ML Seconds 1/26/2009
13.7 13.4 1000 60
Low
Watts MMW ML/MIN 103*F
183.58 5.447 1000

BoyntonStu

[BoyntonStu]

Volts Amps ML Seconds 1/29/2009
13.9 18.6 1000 42
Low
Watts MMW ML/MIN 103*F
258.54 5.52 1428.57

I installed my new reservoir fittings today and I switched from a glass jar to used plastic jar that I found.

The new Amoeba fittings have no adhesive, no heat was used, and there are no threads tapped into the reservoir. Just a smooth drilled hole!


It took me all day to fabricate the 4 prototypes.

In production, they should be warp speed faster.

I will keep you posted regarding leaks, etc.

BoyntonStu