Should I move forward on this invention?

[BoyntonStu]

New subject; new hose connection invention.


I have invented a new way to attach any smooth metal tube to any thin or thick plastic or metal plate surface without using heat, or adhesives of any kind.

For example, take a peanut butter jar, drill a hole large enough for your 1/4" OD tube to fit through. I can add a few easily available hardware components to make it tight and leak proof with the tightening of a nut.

Much smaller than a plumbing barb.

This invention will work with any diameter metal or hard plastic tubes.

Intrigued?

Absolutely no leaks, and the tube is is removable.

Put on your thinking caps.

I believe that many might find this hose connection method useful for bubblers, cells, reservoirs, etc.

Remember, no adhesives and no heat.

Can you figure it out?

I am considering a patent.

BoyntonStu

P.S. If interested in partnering on this invention PM me.

[Realtyroy]

You've got my curiosity up and I'm wondering about putting a tube say 3/8" o.d. into the side of a PVC 4" pipe. Will your fitting setup seal to a rounded surface like that without using any sealer?

[coffeeachiever]

Ok. My interest is piqued. Find a need and fill it and you will be successful.

[BoyntonStu]

You've got my curiosity up and I'm wondering about putting a tube say 3/8" o.d. into the side of a PVC 4" pipe. Will your fitting setup seal to a rounded surface like that without using any sealer?

Yes!

BoyntonStu

[protecheqp]

if your using something (component) that is already available its going to be hard to patent. The cost of a patent is a lot of time and money.

you need to ask yourself
is there a demand for it ?
do you have the resources to produce it ?
do you have the money to protect your patent ?
what is the selling cost in comparison to other methods ?
have you done engineering specks for it ( they will ask)

the list of problems go on and on

This is not to be a ney sayer but there is a lot involved ..here is what i designed and built totally all my self as a substitute for foam chips in the packaging ind. and was going to make a kizillion dollars with LOL

heres a pick 1 of those paper rolls would make what you see at the end cost $ 4.50 i ended up selling it for $ 10,000.00

[BoyntonStu]

if your using something (component) that is already available its going to be hard to patent. The cost of a patent is a lot of time and money.

you need to ask yourself
is there a demand for it ?
do you have the resources to produce it ?
do you have the money to protect your patent ?
what is the selling cost in comparison to other methods ?
have you done engineering specks for it ( they will ask)

the list of problems go on and on

This is not to be a ney sayer but there is a lot involved ..here is what i designed and built totally all my self as a substitute for foam chips in the packaging ind. and was going to make a kizillion dollars with LOL

hers a pick

Man o' man! That is beautiful!

Here's my best invention, and 100,000,000 smoke detectors will fit it.

<object width="425" height="344"><param name="movie" value="http://www.youtube.com/v/TP21wqv0ia0&hl=en&fs=1"></param><param name="allowFullScreen" value="true"></param><param name="allowscriptaccess" value="always"></param><embed src="http://www.youtube.com/v/TP21wqv0ia0&hl=en&fs=1" type="application/x-shockwave-flash" allowscriptaccess="always" allowfullscreen="true" width="425" height="344"></embed></object>

BoyntonStu

[Painless]

Sounds to me like your invention is similar to a compression connection, Stu?

[BoyntonStu]

Sounds to me like your invention is similar to a compression connection, Stu?

Russ,

Here's the plastic below:

: :
: :
this is
the hole
: :
: :

How can you use a compression fitting here?

There are NO threads needed to pass through the hole!

BoyntonStu

[HHOinKY]

I say pics (not of the process)

Give us a pic of the finished product...or will that give the method away?

[BoyntonStu]

I say pics (not of the process)

Give us a pic of the finished product...or will that give the method away?

A picture is worth 1,000 words.

Once you see it, you will say, "Why didn't I think of that"?

BoyntonStu

P.S. If I cannot Patent it, I will share it.

[daddymikey1975]

oops..... (edited 'cuz I was wrong)

[HHOinKY]

How long before you'll know?

[overtaker]

Stu, Didn't you already mention the method in one of your videos?

[BoyntonStu]

Stu, Didn't you already mention the method in one of your videos?

This method was invented after my uploaded videos.

In the videos, Epoxy was used.

(PC-10 and JB Weld)

The invention does not require adhesives or heat.

BoyntonStu

[overtaker]

If you could patent this, what would be your reward? If it is something that someone can easily assemble from readily available parts, how would you get a return on your investment? Are you sure you would want to sell something guaranteed leak proof? Lets say someones booster leaks a caustic electrolyte all over a BMW'S frame, who's responsible? Please tell us about the contraption you were riding in that video.

[BoyntonStu]

If you could patent this, what would be your reward? If it is something that someone can easily assemble from readily available parts, how would you get a return on your investment? Are you sure you would want to sell something guaranteed leak proof? Lets say someones booster leaks a caustic electrolyte all over a BMW'S frame, who's responsible? Please tell us about the contraption you were riding in that video.

My $100 elevator?

BoyntonStu

P.S. If my elevator causes an accident, I am responsible.

(In use for 6 years)