PDA

View Full Version : Amoeba Cell input check valve


BoyntonStu
11-12-2008, 05:52 PM
Amoeba Cell input check valve


The Amoeba Cell has 15 2x6 plates and each plate has a single 1/4" hole.

A check valve was installed in the input line in order to force the generator to start flowing in the correct direction.

It seems obvious after you have once tried it.

I hope that this helps.

BoyntonStu

http://www.youtube.com/watch?v=vI_3vRKaiVU


<object width="425" height="350"> <param name="movie" value="http://www.youtube.com/v/vI_3vRKaiVU"> </param> <embed src="http://www.youtube.com/v/vI_3vRKaiVU" type="application/x-shockwave-flash" width="425" height="350"> </embed> </object>
daddymikey1975
11-12-2008, 06:37 PM
Ecellent work stu :)
oicu812
11-12-2008, 07:56 PM
hello stu... I just picked up 24 pieces of 316 2 inches by6 inches and was thinking of building your type of cell but have a couple questions. is the inner tube a good leak proof gasket? is the single 1/4 inch holes enough and are they towards the top alternating sides plate to plate ? does electrolyte and hho both come out the outlet side and get seperated in the bubbler? than I suppose there's a return line going back to the resevoir. i'm looking to get max hho and amperage is not a problem.
BoyntonStu
11-12-2008, 08:26 PM
hello stu... I just picked up 24 pieces of 316 2 inches by6 inches and was thinking of building your type of cell but have a couple questions. is the inner tube a good leak proof gasket? is the single 1/4 inch holes enough and are they towards the top alternating sides plate to plate ? does electrolyte and hho both come out the outlet side and get seperated in the bubbler? than I suppose there's a return line going back to the resevoir. i'm looking to get max hho and amperage is not a problem.

Watch this closely> http://www.youtube.com/watch?v=vI_3vRKaiVU'


See any leaks?

Is the single 1/4" hole enough?

Amoeba Cell Water flow through 1/4" tubing
A garden hose is connected to the Amoeba Cell. There are 15 2x6 plates with a single 1/4" hole in each, and with 0.050" inner tube gaskets.

http://www.youtube.com/watch?v=5al4_6a2-0o

BoyntonStu