Sticky this! - Where to get stuff and its cost

[resago]

30Amp Breaker - Orieleys Auto,etc $4

40Amp Relay - Orieleys Auto, etc $4

Wire and spade connectors - Orieleys Auto, etc $10
10Ga red/yellow 12Ga Black

Vacuum Switch VOES - ebay $27 - optional
(probably cheaper from a parts store)

SS Plates - multiple sources,Lowes $2 each for a switch plate cover
(Kits on ebay <$200) get the ebn style dry cell if you buy from ebay. http://stores.ebay.com/Evergreen-Hydrogen
11 plate=$160 16 plate=$210 21plate=$260

Nylon Bolts -?? (someone help here) McMaster?

Reliable checkvalve (??)

PVC Tubing - lowes $2/foot (I think)

KOH - AAA chemicals 2lbs $20
(way more KOH than you will EVER use)

Distilled Water - store - $1/gallon

Please add more!!!!!

[Painless]

Nylon bolts - Lowes hardware section, big choice.

Automotive Amp Gauge from www.sunpro.com $13.

[Stevo]

Distilled Water - $0.68/gal - Walmart

Analog Ammeter guage *high granularity* (30~50 amp) - $9-15 - Ebay (one I bought: ammeter (http://cgi.ebay.com/ebaymotors/ws/eBayISAPI.dll?ViewItem&sspagename=STRK%3AMEWNX%3AIT&viewitem=&item=280273589238))

Neoprene Rubber Sheet Plain Back, 1/16" Thick, 36" Wide, 80A Durometer (Part#9455K922) - $9.02 /ft

100% Sodium Hydroxide (Crystal Drain Opener) - $8 - Home Depot

Nylon Tube Fittings [185*F] 18 tpi ['3/8 x 3/8' , '1/4 x 1/4' , '1/4 x 3/8'] - $1.79~1.99 ea - Ace Hardware || Home Depot

[Painless]

DaddyMikey1975 wants to add (via PM, he can't post yet):



Hey there.

in reference to this thread

http://hhoforums.com/showthread.php?t=1743

I'd like to add

Nylon 'all thread' (5/16" threaded rod) I was unable to find at any hardware store, so i purchased from Grainger supply 2 feet for about $8

Distilled water = FREE (from de-humidifier in basement)

can you post this for me?

thank you

mike

[BoyntonStu]

A: Get 3 ATX supplies from junk PC's.

Connect the 5 Volts in series for a regulated 30 Amp supply.

B: Get a big old microwave and remove its transformer "MOT".

Hack off the secondary wiring and rewire it with about 14 turns of #14 wire.

Buy a bridge rectifier from Ebay or 4 power diodes. About $10

A: Is better and easier if you can scrounge 3 PC's.

BoyntonStu

[Farmercal]

30Amp Breaker - Orieleys Auto,etc $4

40Amp Relay - Orieleys Auto, etc $4

Wire and spade connectors - Orieleys Auto, etc $10
10Ga red/yellow 12Ga Black

You can get a Tyco/Bosch 30/40 amp relay with harness (5 wire) for about $7 shipping included on eBay. Just keep looking you will find it. Works just fine and easy to hook up. Takes about a week to get delivered but well worth the wait to save the cash.

Also check out US Plastics for plastic parts including nylon rods. Good prices.

[JonDoh]

Reservoirs/bubbler (coolant overflow) - Advance Auto, Autozone, Wal-mart (rarely) $7.99

SS fasteners, Nylon & more - www.Fastenal.com

[HHOinKY]

clear pvc.

http://cgi.ebay.com/4-inch-CLEAR-PVC-Pipe-spud-gun-tumblers-filters_W0QQitemZ270289585629QQcmdZViewItem?hash=i tem270289585629&_trkparms=72%3A1240|39%3A2|66%3A3|65%3A12|240%3A13 18&_trksid=p3286.c0.m14

[hg2]

Potassium hydroxide $7.45 for 2lbs.

https://www.saltcitysoapworks.com/store/store.php?crn=216&rn=381&action=show_detail





40 amp relay $4.95
50 amp relay $5.90
60 amp relay $6.55
80 amp relay $27.95


http://www.wiringproducts.com/index1.html

[resago]

D-12 Disposable Spray Gun Filter .01 micron filter Part Number: MOTD12-2
$8.55 double pack http://www.costplustools.com/Motor%20Guard%20D122%20%20%20Disposable%20Spray%20 Gun%20Filter%202%20Pack_p_391-3413.html?utm_source=googlebase&utm_medium=SCS&utm_term=MotorGuardD122DisposableSprayGunFilter2Pa ck&utm_content=Select&utm_campaign=BROI&site=google_base
There is a minimum order, so you have to get 2 packs.

[hg2]

D-12 Disposable Spray Gun Filter .01 micron filter Part Number: MOTD12-2
$8.55 double pack http://www.costplustools.com/Motor%20Guard%20D122%20%20%20Disposable%20Spray%20 Gun%20Filter%202%20Pack_p_391-3413.html?utm_source=googlebase&utm_medium=SCS&utm_term=MotorGuardD122DisposableSprayGunFilter2Pa ck&utm_content=Select&utm_campaign=BROI&site=google_base
There is a minimum order, so you have to get 2 packs.

What do you use the filters for?

[Bill Bailey]

Have a look at all the interesting stuff (Technical term ) :D you can get at this one place.

http://www.smallparts.com.au/store/categories/?alpha=ALL=post

[resago]

heheh, whats the shipping cost from australia!?:eek:

[resago]

What do you use the filters for?

it will remove the last traces of electrolyte vapor.

[Stevo]

Let me add this very important item:

Bubbler fluid reservoir (coolant return tank)

Quest 1.5 Qt (larger available) Slimline Coolant Reservoir

High Density Polyethylene
Pop-off lid that snaps on

$7.99 - AutoZone

**Note: I have found that the only mod this tank needs is a approximately 1/8" thick round neoprene foam (shore 50 or 60 OO) gasket to replace the neoprene 1/16" (shore 40 A) gasket that comes with the unit. It's very possible to find what you need at Walmart or another local store. I ordered my gasket material here:

http://www.mcmaster.com

Part No. 8647K31 (http://www.mcmaster.com/nav/enter.asp?partnum=8647K31&pagenum=3445)

[M34me]

D-12 Disposable Spray Gun Filter .01 micron filter Part Number: MOTD12-2
$8.55 double pack http://www.costplustools.com/Motor%20Guard%20D122%20%20%20Disposable%20Spray%20 Gun%20Filter%202%20Pack_p_391-3413.html?utm_source=googlebase&utm_medium=SCS&utm_term=MotorGuardD122DisposableSprayGunFilter2Pa ck&utm_content=Select&utm_campaign=BROI&site=google_base
There is a minimum order, so you have to get 2 packs.
What's this for?

My bad I quoted and posted b4 I went to the next page